-
The "MH-S220 One-Load+" does not switch the relay via sw1, well via sw2
However the device's relay is switching sw1 and sw2 in the Open Z-Wave Control panel and toogle switch
Found this in the lo…
-
# Problem/Motivation
> After updating to 0.32.2, my zwave network stopped working. The logs show an awake / asleep loop for a smoke detector that is definitely asleep. Its a first alert zcombo and …
-
**Is your feature request related to a problem? Please describe.**
I have some wall switches with LEDS, where I've finally figured out how to make them blink. The vendor has (mis-)used an unused colo…
-
Please see forum issue [https://www.domoticz.com/forum/viewtopic.php?f=6&t=31559](https://www.domoticz.com/forum/viewtopic.php?f=6&t=31559) which has problem investigation and debug evidence.
**Ve…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within ZWaveJS2MQTT?
NO, my pr…
-
### The problem
When I restart both Zwave to MQTT and Home Assistant simultaneously (for example after updating both or after a complete reboot of the server machine), Zwave js integration will fail …
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within ZWaveJS2MQTT?
NO,…
rahi6 updated
2 years ago
-
https://github.com/Domochip/jMQTT/projects/1#card-60234017
@Domochip
> Créer une moulinette de création de template de device à partir des infos des repo de zigbee2mqtt, Zwavejs2Mqtt, etc...
L…
-
### The problem
Hello,
Currently running the latest ZWaveJStoMQTT addon, and after the 12.0 upgrade, I get the below error.
This is a bit confusing because the latest ZWaveJStoMQTT is running…
-
### Checklist
- [X] I am not using Home Assistant. Or: a developer has told me to come here.
- [X] I have checked the troubleshooting section and my problem is not described there.
- [X] I have read…