-
Oscillation or high current draw with multiple paralleled output channels.
Simulated loop gain shows equivalent half load looks ok, but small load (looking into other op-amp output during transient…
-
Hello everyone, I'm building a CNC and while I'm waiting for the mechanical parts, I already built the electrical board which include an Arduino with GRBL v1.1h, DM566 as stepper drivers and one chine…
-
**Describe the problem you have/What new integration you would like**
I request ESPHOME team to implement support for DS2438 1-Wire Battery Management Smart Battery Monitor with Temp Sensor.
…
-
Hi,
I have a Nilan 300 Comfort Top and will give your sketch a try as soon as I receive my RS485 to TTL converter part.
However, I would like to also add a CO2 sensor (MH-Z19B) as the Nilan Optio…
-
- **MIC inputs**
- MIC1 and MIC 2 generate reasonable output with XLR cable [PASS]
- MIC1 and MIC 2 generate reasonable output with Hilton-compatible cable [PASS]
- MIC vol and EQ controls wo…
-
Hi! This project is awesome! Is exactly what I was searching for! Thanks!
A list of compatible hardware, even better a table with supported/unsupported functions would be great.
I am building a …
-
Experiencing issues with an SP100 during commissioning activities:
- Intermittent success on live bus start
- Issues with unit faulting throughout the night daily
- Water cooling instability
-
Hello Kyle,
I would like to control the brightness of 3 led strips (red, blue, white) in the time.
For example function 1 : day 1 = 10%; day 2 = 15%; day 3 = 20 % ... day 15 to day 30 = 100%
fu…
-
**Describe the bug**
Unable to use External Excitation with the NI-9237 module and the EtherCAT custom device
**To Reproduce**
Steps to reproduce the behavior:
1. Go to Slot Settings and set Exc…
-
**I have an Azteeg X3 Pro (ATMEGA2560 and RAMPS 1.4), and I see that it only has analog input pins.**
How would I convert one of these **analog INPUT to OUTPUT** pins and is there a way I can vary …