-
Hi
Thanks a lot for this ESPhome code. It seems that my gate is wired through the alarm system (I can currently use the same remote to open the gate and arm/disarm my alarm), and so is my intercom/be…
-
### Problem description
I have a tuya zigbee siren. It is a new model i guess. How can i get this working with ZHA?
I can only see it in home assistant but it has no entities and can not be controll…
-
just recently built a big enclosure for my 700x700 work space cnc....
so i extended my wires made new wires etc (everything worked perfectly before hand)
when i first turned it back on all joggi…
-
**Issue Description**:
When installing a new Fire Alarm, you need to add wires/cable coil. If you do not have enough wires/cable coil, the wrong text appears.
**What did you expect to happen**…
-
### BYOND Version
_No response_
### Round Date
2024/03/28
### Round ID
48175
### Test merges
_No response_
### Describe the bug
APC on Corg's Cargo Bay is no longer wired at…
-
### The problem
Release 2024.7.3, Dallas_temp on ESP32 gets "Scratch pad checksum invalid!" Works fine in 2024.6.6
13:55:05 | [W] | [component:170] | Component dallas_temp.sensor cleared Warning f…
-
Setup is:
Crow Runner 4 (same as Runner 8 but with less inputs)
ESP8266 / NodeMCU ESP-12F Module
Logic level converter (https://www.jaycar.com.au/duinotech-arduino-compatible-logic-level-converter-…
-
### Checks
- [X] I have searched the bug with a few keywords, and I confirm this bug was not yet reported.
- [X] The round I am reporting the bug from, or I am going to talk about, has already ended.…
-
To make the hypnos power rail control easier, an enum system was implemented. This should be tested with different configurations of enabling/ disabling the power rails. These changes are on the lates…
-
### Environment
- Build Version: 22032806
- OS Version: Mac_Catalina
Constructed fire alarms (not working) and firelocks duplicating.
We should be able to mount fire alarms to a wall and s…