-
The current description/comment for the parameter "pmd-name/pmdName" is:
```
leaf pmd-name {
type string;
config false;
description
"To be chosen from the followi…
-
With the latest develop version (which is required for Linux 6.8), I cannot get our TN9710P (with MV88X3310) to initialize.
Loading the module leads to the following output:
```
[ 878.238757] tn…
-
In wire-interface status , we have an attribute **pmd-kind-cur.**
**pmd-kind-cur** is a leafref referencing the **/core-model:control-construct/…/wire-interface:supported-pmd-kind-list/wire-interf…
-
I´m trying to install the driver under kernel 5.10.0.5.
dkms runs without a problem, but no NIC comes up.
The same with the patched sources from christsich
lscpi -k shows 2 TN9710P tied to kern…
mlc42 updated
1 month ago
-
**Is your feature request related to a problem? Please describe.**
I do have use cases where I would like to have jails with multiple interfaces attached to different bridges on different VLANs (mgmt…
-
**Is your feature request related to a problem? Please describe.**
I'm trying to setup dual-stack pots (one per service) and while the IPv4 part with vnet is fine, I have issues with the IPv6 part.
…
-
This is on a Debian-derived 5.2.17-1rodete3-amd64 system.
[161345.272682] Tehuti Network Driver, 0.3.6.17.2
[161345.272687] Supported phys : MV88X3120 MV88X3310 QT2025 TLK10232 AQR105 MUSTANG
[…
-
Hi All,
I've just bought a pair of ST-Lab N-480 10G adapters and installed them into machines with Fedora 34.
`uname -a
Linux amphimachairodus 5.12.8-300.fc34.x86_64 #1 SMP Fri May 28 15:20:54 …
-
I'm running a macOS Ventura 13.6.8 system with OC 1.0.0 and a X520-DA1 (device id 0x10fb, subsystem ID 0x000a) which is connected to a ZyXEL XGS1210-12 switch with a short passive Direct-Attach-Cable.…
-
Is it possible to port the project to 1Gbe?