-
-
I’ve got some t5577 tags em4100 and the chameleon ultra can read them if I write them from my flipper to pac/stanley only the flipper recognises them has anyone encountered this before am I doing som…
-
### Describe the enhancement you're suggesting.
Hi,
Flipper cannot read a T5577 fob used for gate access.
The fob in itself is completely generic
 periodically. The tx_ptk is as following and `lgw_send` retur…
-
I am not able to use SF12 with any BW less than 500khz
I am not able to use SF11 with any BW less than 250khz
I am not able to use SF10 with any BW less than 125khz
I am not able to use SF9 with an…
-
I have received a reader which is similar to the one we discussed over [here](https://github.com/monkeyboard/Wiegand-Protocol-Library-for-Arduino/issues/59), but this one uses the 125khz standard inst…
-
### Description of the feature you're suggesting.
It would be cool if there is a card identifier/analyser app like the card cloners have. You start it present the card and the app cycles trough the d…
-
### Description of the feature you're suggesting.
Currently seems that pyramid PSK3 low frequency tags (They use T5577's) are not scanned for and cannot be read/emulated. Wondering if it is possible …
-
I'm trying to make a clone of em marine. I read the data, try to write modifications to the H7 card (It bypasses network filters) It shows me what is written. I check and see that the ID on the H7 car…
-
My Python App Turns on the power, turns on the 3.3v-5v level shifter, waits 100ms, call AVRDUDE, turns off level shifter, turns off power:
Sends this command using subprocess:
command = 'sudo a…