-
```
Compiling bootloader.c
Compiling ddr2_calibrator.c
Compiling small_printf.cc
Compiling itu.c
Linking using GCC...
nios2-elf-g++ -Wl,-Map=output/secondary.map,--gc-sections -msys-crt0=../../.…
Zibri updated
8 months ago
-
On 1541Ultimate II+, the latest firmware, running the Configure program on GEOS 1.3 crashes GEOS immediately.
-
See attached. Works properly at 1 MHz.
-
Hi,
Sometimes in a .tap preserved file (magazine, multi-games or Turbo Load tapes), you have all programs/games saved one per one (because all of them are recorded after each other in one preserved…
-
Hi,
I would like to load tap preserved files from cassettes with Turbo Load. In a .tap preserved file (from a cassette), you have all the programs saved one per one (all of them are recorded after ea…
-
Note: this is NOT an issue or shortcoming of the 1541U2+ but more a SX-64 issue.
Some NTSC SX-64s (not sure about Pal systems) have difficulty in producing the dma delivered opening menu of the 15…
-
The Ultimate 64 / Ultimate 64 Elite compatibility issue outlined below is present while loading **ANY** retail V-Max! copy protected title on physical retail floppy disk loaded from a real 1541 or eve…
-
SID Audio in is mute while playing mod file with internal MOD-player of U2+
It gets unmuted after pressing middle button twice.
-
The very simple demo called "Rampage Demo" has a tiny glitch in the second part of the demo.
The demo itself can be found here: http://www.vdpoel.org/RampageDemo.d64
When I run this demo on my Ult…
-
Is there a way to do a reset (full hardware reset) to the Ultimate II+ ?
Brian