-
This has been an issue for a few years now. The Arduino IDE (currently using 2.2.0) cannot burn the bootloader to this chip as it attempts to set the high fuse bits, which cannot be done. Unsure why t…
-
The Sparkfun Pro Micro (and presumably the other 32u4 boards) use a different COM port depending on if it's in bootloader mode.
I'm currently trying to just get a blink sketch working on a Pro Micro…
-
Love your work. Any chance to add 32u4 support. It is not writing or reading from the EEPROM.
-
I know the 32u4 doesn't have a hardware encryption module, but could you use an external chip?
-
Hi,
I found trouble with a HX711 connected to a Feather 32u4 (I tested various pin) working at 8 MHz. It seems to not communicate with the HX711.
The same circuits work well with an Arduino board, …
-
Thank you for this effort. It's working well on UNO.
We tried to run SDISerial on 32u4 boards such as Arduino industrial 101 and 32u4 based Nano.
@joranbeasley Do you have any suggestions to so…
-
I am using the a drofly Flightcontroll with a Mega 32u4. Could somebody help me to get the HoTT function running on my system? I am using the Graupner MX12 and would love to see the HoTT function.
-
Hi,
I'm think this thing not support 32u4 because after flash they don't get regconized after plug into an USB port. I think it's a good idea to make another version for 32u4 because it's much more p…
-
According to the library mouse.h only works with 32u4 controllers, Due and Zero boards. So Nano does not work.
I am new to Arduino and could not make screensave-mouse-jiggler work on a Nano ATmega…
-
I bought a Feather 32u4 instead of M0.
can u provide the INO file for the Feather ?
or provide an additional bin file for the 32u4 ?
**need your HELP thanks!!!**