-
Hello,
I am trying to use zolertia mote with BR12. Here is my questions.
1).Is there any compatibility issue?
2) BR12 contain the M12 Redwire 6lowpan Border router, M12 can communicate with zolertia…
-
Hi, Does anyone know how to write an example to connect Thread/6LoWPAN endpoint devices to the Edge (i.e. Raspberry Pi?) through nanostack?
Edited: Change from Zigbee to Thread/6LoWPAN
-
Hello everyone,
I want to create 6lowpan border router in ubuntu (contiki), to get the results from ipv6 tmote sky.
I did exactly as the instruction from:
http://morschi.com/2017/03/28/setting-up…
-
Dear all,
i have a FiPy here where i want to connect my contiki-os rpl-border-router via uart in order to query the 6lowpan nodes via CoAP and send the responses to my server via NB-IoT.
Therefo…
-
In a project I'm trying to do, using KNXD, I've felt the need of using --Server with IPv6.
If you are wondering why: I'm trying to use 6LoWPAN (Contiki) network as a medium for KNXNetIP; I'll try to …
-
I am checking the Zephyr microPlatform. I can not understand how the FOTA is working. Should the end device be connected with the internet or it can be upgraded using the existing communication protoc…
-
#### Description
When operating a border router, we have to rely on requesting a prefix for the 6LoWPAN network via DHCPv6 IA_PD.
This is not always possible, it requires cooperation of both the…
-
I am trying to setup the 6Lowpan network with Beaglebone Black (Linux Debian) as edge router, CC2531 USB Dongle as SLIP Radio and two cc2650 flashed with cc26xx-web-demo as mesh nodes.
I am able to…
-
hello,
im building an iot project using ti launchpads, i have two launchpads i flashed on the gateway the 6lbr lite (the one connected with olimex Ethernet controller) using one of the cc1310 launchp…
-
Hi, I have 6LBR setup on a Raspberry Pi. I have tried and found great success following the documented approaches whereby at least one of my mesh's nodes is attached to the RPi as a SLIP radio.
Howe…