-
in HA with mqtt auto discovery i have a bluetti device with nearly no sensors and i have a lot of sensors without device.
It would be nice to have all sensors belonging to bluetti device after discov…
-
使用官方build报错:
```
drivers/net/ethernet/allwinner/sunxi-gmac.c:2193:13: error: ‘ucc_geth_suspend’ undeclared here (not in a function)
drivers/net/ethernet/allwinner/sunxi-gmac.c:2194:13: error: ‘uc…
-
I uploaded the code to my ESP32 and received no data. I found a work-around and I thought I'd post it. I separated the polling request into smaller chunks and it started working! Thanks so much for…
-
I'm really sorry for offtop but I find this repo the most powerfull about device tree H616 based board.
If it not get you into trouble, can you help to make i2s0 work. (PI0-PI 4)
There are some reco…
-
**Device Information | 设备信息**
- SOC: H6
- Model [TQC-A01]
**Armbian Version | 系统版本**
- Kernel Version: [6.6.31]
- Release: [jammy/noble]
**Describe the bug | 问题描述**
有线网卡和无线网卡都没有正确驱动
Al…
-
### Category
Other
### Hardware
DIY
### Firmware Version
2.3.13.83f5ba0
### Description
The MQTT connection configuration on Portduino only works through the Android app, and it continuously co…
-
We want to use lpddr/ddr4 on h616, but the mainline u-boot does not support it, is there any other way than using sunxi-uboot?
-
### What happened?
dear @chraac,
I'm testing orangepizero2w builds and it seems that ethernet PHY is not getting powered, output dmesg:
```
[ 2.119267] dwmac-sun8i 5020000.ethernet: IRQ eth_w…
-
**log:**
```
aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected!
aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected!
aarch64-linux-gnu-ld: ID map text too big or misalign…
-
### Creating an image request
#### Formal device information
- Device name | Orange Pi Zero 2W
- Official product URL | http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-a…