-
Hello, i have esp12 and wemos programmed, but i get no access point.
Esp12 gives
14:48:07.860 -> load 0x4010f000, len 3584, room 16
14:48:07.860 -> tail 0
14:48:07.860 -> chksum 0xb0
14:48:07.86…
-
I guess we should probably decide on default WiFi access-point credentials for this.
Not urgent, but I have a feeling my mobile is going to become a roaming access-point.
-
**Is your feature request related to a problem?**
Hello Team, my company is effectively using the S3 controller to support the creation of new on-demand environments. Recently, we have been looking…
-
### Describe the bug
No access point and routing fails.
### Expected Behavior
Find access points for 2 cell pins and route.
### Environment
```shell
v2.0-16472-gc7283c089
```
### To Reprodu…
-
To allow us to setup access points that selectively share the prod data buckets into other accounts - we need to first setup the bucket so it broadly trusts access points.
This is how we set it up …
-
### Creating a bug report/issue
- [ x] I have searched the existing open and closed issues
#### Required Information
- DietPi version | `G_DIETPI_VERSION_CORE=9
G_DIETPI_VERSION_SUB=8
G_DIETPI_…
-
Device: Raspberry Pi Pico W
mDNS seems to not work when combining the two basic examples from the project: [Manual AP](https://github.com/adafruit/Adafruit_CircuitPython_HTTPServer/blob/main/exampl…
-
Bassicly I need to run wireless access point on Raspberry Pi Zero 2 W, but without internet connecton, only local netwrok. Raspi system:
Operating System: Raspbian GNU/Linux 11 (bullseye)
Kernel: Li…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate.
- [X] Described the feature in detail and justified the reason for the request.
- [X] Provided spec…
-
### Describe the bug
Trying to use a policy based on aws.s3-access-point to notify and/or delete on CreateAccessPoint events if matching the filter but instead fails with an unhandled ParamValidation…