-
Using SPIFlash without cache to save RAM (4kB)
Could the SPIFlash library be safely used without cache? Of course keeping in mind the impact on performance. But in practice, any real usage waits at…
-
Hi Ted,
see below. We have the Adafruit breakout boards as suggested but they don't fit the sensor head. Either we have printed the heads incorrectly or the boards are too big by about 1mm. There isn…
-
I'm using a FLIP C3 board, which does not have SPI pins (only I2C, UART, digital, analog). I've tried declaring an SPI pinout in the pins_arduino.h file just to see if it fixes the error, but that did…
-
Arduino IDE version (found in Arduino -> About Arduino menu):
2.3.2
List the steps to reproduce the problem below (if possible attach a sketch or
copy the sketch code in too): LIST REPRO STEPS BE…
-
ESP32 S2 Mini uses dual UART USB and changes active USB port when switching to firmware upload mode. ESP Web Tool breaks with this board:
Connecting via Web Serial works well, selection menu shows…
-
Similar to issue #8, it has been observed that all Cryologger tracking beacons deployed in 2023 have been unable to increment the iteration counter past 766. It is suspected this behaviour is due to a…
-
Hi. I am an astronomer/astrophotographer. I am currently building a control board for my Celestron telescope and one of the metrics I want to collect is the Dew Point. I will use this in deciding t…
-
I'm wondering if there is support for the -> https://www.adafruit.com/product/3421 this Breakout board has LRCL, DOUT and BCLK
-
Hello friend, i try the basic code with my wemos d1 mini n transistor BC547 but did't work
This is the result
![IMG-20240930-WA0070.jpg](https://github.com/user-attachments/assets/7904dbf3-d3fb-4983-b…
-
Hey folks,
It appears that the LIS2MDL library is subject to the same type of memory leak I found in the LSM6DS library: https://github.com/adafruit/Adafruit_LSM6DS/issues/28
Similar to my last …