-
## This issue is a
- [x ] Bug Report
- [ ] Feature Request
## Hardware Configuration
Raspi 4B 2gb
Adafruit RGB Matrix Bonnet
64x32 RGB LED Matrix
(The suggested BOL)
## Software Config…
-
adafruit has some new 240x135 and 240x240 display hats that cover 2x12 gpio
pinout is available here https://learn.adafruit.com/adafruit-mini-pitft-135x240-color-tft-add-on-for-raspberry-pi/pinouts
-
I have a 64x32 matrix connected through the adafruit HAT and I can't get anything to appear on the screen. I have multiple displays because I was planning on chaining them but none of them seem to wor…
-
Hi
I am using https://www.adafruit.com/product/2348 and it's working great.
I notice in the Johnny Five docs that some boards can do current sensing http://johnny-five.io/examples/motor-current/…
-
When I'm trying this:
```rust
let mut config = LedMatrixOptions::new();
config.set_hardware_mapping("adafruit-hat");
println!("TOMB1");
let matrix = LedMatrix::new(Some(config));
```
the co…
-
I have an Adafruit RGB Led Matrix, 64x64 P3, and I'm using the Adafruit HAT. I'm running the program on a Raspberry Pi Zero and having difficulties with the mapping, which seems to be incorrect.
This…
werls updated
3 months ago
-
## Motivation
For the v2.3 software release, two separate SD card images were provided - one to provide hardware support for the Adafruit HAT, and the other to provide hardware support for the Plan…
-
@hzeller
I have a single chain of seventeen 16x32 led panels. I had previously wired my raspberry pi 3b+ to the first panel using jumper cables per the wording diagram, and it worked great. I have t…
-
The "row of five" pads on the Adafruit Perma-Proto HAT.fzpz are not connected. If I connect a component to one pad in a row of five, and a wire to another in the same row, Fritzing does not show that …
-
Hi community!
I'm a passionate noob trying to learn electronics, and I've spent many hours trying to solve my issues on my own. Now I'm reaching out to you:
I've purchased 3 [LED panels 64x32](https…
oryz0 updated
1 month ago