-
I'm wondering if there is support for the -> https://www.adafruit.com/product/3421 this Breakout board has LRCL, DOUT and BCLK
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
K0I05 updated
6 minutes ago
-
I'm trying to read data from the SPH0645LM4H.
The output received is :
```
f8d98000
f8d74000
f8d54000
f8e84000
f8e60000
f8e50000
f8e24000
f8e2c000
f8e48000
f8dfc000
f8e0c000
f91ac0…
-
I am using a rpi 2 with the add-on IQaudIO sound card.
This has a DAC that connects to the rpi2 using i2s.
I wanted to add the Adafruit I2S MEMS Microphone to this setup.
After building the my_load…
nivw updated
8 months ago
-
Should be a widely documented device for use on Raspberry Pi Pico with examples.
-
As a newcomer to this great sensor and python, I am getting good data using bno055_simpletest.py. It would be very useful if we had the option to save the self-calibration data for re-use at start-up,…
RicDG updated
2 years ago
-
Mic Module : [SPH0645LM4H](https://www.knowles.com/docs/default-source/default-document-library/sph0645lm4h-1-datasheet.pdf)
Micro-controller ESP32.
Problem : I get 1 as my output.
Configurati…
-
Re this thread:
https://forums.adafruit.com/viewtopic.php?f=60&t=176800
Recreated using Pi Zero W:
```python
pi@raspberrypi:~ $ python3
Python 3.7.3 (default, Jul 25 2020, 13:03:44)
[GCC 8.3.…
-
I am using an Adafruit I2S Mic with M0 Feather Board. Which parameters/flags do I need to change to read MONO channel data? Currently it is reading stereo data.
-
Hopefully an easy fix - perhaps https://pinout.xyz/pinout/pcm should also mention the acronym I2S, since I suspect "the I2S bus" is a more common name than "the PCM bus" ?
lurch updated
2 years ago