-
- Arduino board: **teensy 4.1**
- Arduino IDE version (found in Arduino -> About Arduino menu): **not installed / not relevant**
**REPRO STEPS BELOW**
* apply patch from https://github.com/…
-
I'm using a FLIP C3 board, which does not have SPI pins (only I2C, UART, digital, analog). I've tried declaring an SPI pinout in the pins_arduino.h file just to see if it fixes the error, but that did…
-
I am running into an issue where after upgrading the ESP32 package from 2.0.17 to 3.0.x, Neopixel sketches with an LED count of 76 or more get into a crash loop
I am using the Adafruit_NeoPixel '[s…
-
Just a note, had to switch out the neopixel library/class for neopixel_spi and connect to MOSI pin as RPI5 doesn't support neopixels via standard GPIO anymore. More info at https://learn.adafruit.com/…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.1 on 2024-07-23; FeatherS3 with ESP32S3
Board ID:unexpectedmaker_feathers3
UID:0740D1DA1CCA
```
### Code/REPL
```python
import boar…
-
Board
ESP32 Dev Module
Device Description
ESP32 DEVKIT V1 DOIT
Hardware Configuration
No
Core Version
v3.0.2
IDE Name
Arduino IDE 2.3.2
Operating System
Windows 11
Flash freque…
-
- Arduino board: arduino leonardo
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.19 (Windows store 1.8.57.0)
- List the steps to reproduce the problem below
When run…
-
Looking at the code it looks like you use GPIO 18 pin. Do you have to use that? can you use any GPIO pin?
Reason I'm asking is I want to make a wiring harness to quickly connect the WS2811 lights a…
-
@billpugh The new version of Adafruit_NeoPixel.h correctly includes:
```
#ifndef ADAFRUIT_NEOPIXEL_H
#define ADAFRUIT_NEOPIXEL_H
```
It also includes the setBrightness() function. Should we update …
-
There's duplicate code and it can cause confusion. It may be left over from before idf. Yeah, it depends on AdaFruit_Neopixel library.
There is a neat Cp437 utf8tocp437 which probably was for the a…