-
In file included from /Users/nianhong/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/io.h:272:0,
from /Users/nianhong/Library/Arduino15/pa…
-
Using the example python code, installing the 0 ohm resistors, and removing the COM/AVSS jumper as instructed results in incorrect resistance readings.
I thought at first that I might have done some…
-
i have ads1263 from waveshare [https://www.waveshare.com/wiki/High-Precision_AD_HAT](https://www.waveshare.com/wiki/High-Precision_AD_HAT), But when i start running the exaple code , nothing is showi…
-
Hello,
First of all thanks, for your library.
I've been using your module with this library on a RPI 3 and I achieved to use the ADC with a 3V3 reference. For that, I had first to change the re…
-
Hello,
i was wondering how i can get a higher sample rate when reading a sensor. I use a Raspberry Pi with 8 gig RAM. CPU is set at 1200 Mhz. I am using the ADC-device to capture sound, so i need at …
-
I've only just received an ADS1263 and was using this library to test it.
I'm posting this now for anyone who comes across this problem. I don't have time to do more with it at the moment.
readA…
-
Hello, I have recently started using your High-Pricision_AD_HAT for a university project.
I have successfully used it to read and log sensor values using a raspberry Pi and custom python script (wh…
-
When I use the Raspberry Pi 4B with raspberry pi OS 64 bits, the bcm2835_spi_interupt always causes the kernel to panic. Two SPIs are used on the Pi, spi0 for mcp2515 and spi6 for ADS1263. In the beg…
wbb12 updated
2 years ago
-
Hey Iam a Beginner. And Iam looking for help. Maybe you can.
I would like to use the [waveshare high precision adc ](https://www.waveshare.com/wiki/High-Precision_AD_HAT)hat with raspberry pi4.
…
-
The RTD probe is just sitting on the desk in room temperature but we are seeing a wide …