-
![image](https://github.com/user-attachments/assets/288d3b39-ded8-44c7-9613-a117116aef51)
Every time I wake up,If it is the first time to awaken, he must be in channel 2, and subsequent awakenings wi…
-
https://www.smartnydom.pl/forum/firmware-do-przelacznika-sonoff/stacja-pogody-esp8266-afe-firmware/paged/2/#post-6769
-
https://www.smartnydom.pl/forum/szybkie-pytanie-szybka-odpowiedz/wgranie-afe-firmware-do-esp32/#post-31295
-
I have compiled the driver and loaded it but when I try to read data from the endpoint created in /dev/fpreader0 I don't get any data.
insmod ft9201.ko
`[ 1688.853717] usbcore: registered new i…
-
Hello,
I attached both temperature sensor and extnernal bistable switch to sonoff basic.
If bistable switch is ON (loop closed = GND is connected to GPIO1), then after powering off sonoff it won…
-
-
-
The hub design is finalized.
The box was equipped with several diagnostic LEDs. Every AFE channel has 3 LEDS:
- connection OK. It is on after CPU detects valid CAN endpoint.
- 5V rail overcurrent
…
-
I have one, would be interesting if we could reuse the hardware, I can imagine you have probably moved on from the project by now.
Your repo is the only one I have found so far, maybe you have some t…
hvegh updated
2 months ago
-
## Environment
- Audio development kit: [ESP32-S3-Korvo-2]
- [Required] IDF version (run ``git describe --tags`` in $IDF_PATH folder to find it):
// v5.1.4
- [Required] ADF version (run…