-
Unable to start Paracon on Debian 12
Qtsoundmodem on local machine
Paracon start and display configuration sceen
after filling all setup field ans doing "okay" Paracon freeze and nothing happen
I…
-
My Direwolf is configured as an RF->Igate and Igate->RF digipeater. Xastir connects via AGWPE.
If I send an APRS message from my phone (K1MLN-7) over APRS-IS,to my Xastir client (K1MLN), Direwolf g…
-
Enable a user of converse.js to log in to the TNC (by sending a P frame).
-
**EDIT**: Apparently I lied about the situation under which I am seeing this behavior. I've updated the description.
---
I'm trying to use the agwpe transport to establish a connection between t…
-
As of v0.14.0 we're adding the concept AX.25 **engine**, allowing the user to configure which transport package to be used for handling the `ax25://` connection scheme and `ax25` listener.
1. We ne…
-
This follows on to issue #510. If I configure two mono devices, like this:
```
ADEVICE plughw:CARD=Digirig,DEV=0
ACHANNELS 1
ADEVICE1 plughw:CARD=DRA,DEV=0
ACHANNELS 1
```
... the second device…
-
When attempting to connect via AGWPE with a very long call sign, Direwolf outputs to the log:
```
Source Address is too long. "TOOLONG" has more than 6 characters.
Internal error in ax25_u_frame_…
-
Hi
I'd like to get programmatic access to the data that is being sent to Direwolf by 3rd party clients like Xastir via the serial, KISS or AGWPE interfaces, and get access to the data the data that…
-
If an attempt to connect via a digipeater fails, a new attempt to connect via a different digipeater uses the previous digipeater (and consequently fails). Direwolf should use the digipeater specified…
-
I use serial port to PTT in Windows 7 (Native RS232 and USB to RS232 adapter). When I turn on the Direwolf the TRX turn in TX.
I only made one change in the direwolf.conf: "PTT COM1 RTS"
I tried the…