-
hello,
in the discussion on the forum.arduino you mention that you have a problem with AHT10/15:
> After a lot of tests and changes, I did not find a way to make AHT10 and AHT15
> work stable …
-
W sumie nie ma tu dużej różnicy z SHT rodziną, wystarczyłoby dodać opcję i zaimportować bilbiotekę:
https://github.com/enjoyneering/AHT10
-
### The problem
The temperature and Humidity have switched place on the esp-idf platform
### Which version of ESPHome has the issue?
2024.2.1 and older
### What type of installation are you using…
-
### The problem
I am trying to connect ENS160+AHT21 to WeMos D1 Mini (ESP8266). Here is the code that I use:
```php
i2c:
## I²C Port - For Temp/Humidity/Pressure & CO²/VOC Sensors
scl: D1
…
-
FYI, there was a bug fix for AHT10 inside ESPHome 2024.3.1 (released on 27th of March 2024)
https://esphome.io/changelog/2024.3.0.html#release-2024-3-1-march-27
https://github.com/esphome/esphom…
Hedda updated
5 months ago
-
There is a mixup of using sensor **Resolution vs. Accuracy**.
The AHT10 sensor example reports the following:
```
Adafruit AHT10/AHT20 test!
AHT10/AHT20 Found!
-------------------------------…
-
使用的是I2C1 引脚SD1_D3、SD1_D0
package为i2c-tools-latest
使用命令i2c scan i2c1时报错:[E/drv.i2c] xfer finish tiemout
测试发现当msg.len长度是0,就会有该报错
测试代码如下:
struct rt_i2c_msg msg;
msg.addr = AHT10_ADDR;
…
-
### The problem
Hello. I want to use the ags10 air quality sensor and aht10 temperature sensor with tca9548a i2c multiplexer on esphome. I couldn't find a source. my code is below. When I write the c…
-
硬件: ES32 + PZEM-004T + DHT20
固件: ESPHome
### ESP32
采购于淘宝的「泽杰旗舰店」,ESP32 WROOM CH340 芯片版本的开发板。
管脚定义:
### PZEM-004T
该模块主要用于测量交流电压、电流、有功功率、频率、功率因数和有功能量,模块无显示功能,数据通过 TTL 接口读取。
esphome 接入…
Bpazy updated
1 month ago
-
Hi, The library does not work for me on ESP32 or ESP32C3, on serial I get "AHT1x not connected or fail to load calibration coefficient". On ESP32 the sensor is connected to the default I2C pins 21,22 …