-
I get this error, having built tools from source, on a Raspberry Pi 3:
$sudo airspyhf_info
AirSpy HF library version: 1.8.0
No devices attached.
lsusb shows the device as expected:
Bus 001 De…
-
Since AirspyR2 and AirspyMini are already supported,
Would it be also possible to add AirspyHF support ?
-
In order to remove the need to run everything accessing the AirspyHF+ via `sudo`; I'm wondering if the following is acceptable as a change to the s/w? (If so, I'll PR it). It does work.
The distrib…
-
Simple request. Since when we run `openwebrx` it starts a service on localhost:8073, this info is in docs.
It could be comfortable if adding this info when `openwebrx` is launched on terminal, for …
-
brew install libusb installed libusb but airspyhf is not locating it
on masoc on m1-m3 lubusb-1.0 is in /opt/homebrew/lib/libusb-1.0
libusb.h is in /opt/homebrew/include
Last 15 lines from /U…
-
I compiled the latest versions of all required packages, but rx_sdr won't work:
SoapySDR and SoapyRemote work, I'm using it with gqrx:
```
SoapySDRUtil --probe="driver=remote,type=airspyhf"
###…
-
# WARNING: Filling out the template below is NOT optional. Issues not filling out this template will be closed without review.
FIRST: Before reporting any bug, make sure that the bug you are report…
-
hello
Yesterday I try to connect two Airspy HF on the same machine.
With SoapySDRUtil --probe="driver=airspyhf" there is only one device detected by SoapyAirspyHF even if airspyhf_info is detect…
-
**Would it be possible to add these Fedora directions to the main pages?**
I finally got airspyhf to install on Fedora and update airspyone_host from 1.0.9 (from Fedora repos) to 1.0.11. I was abl…
-
See https://github.com/archlinux/aurweb/releases/tag/v6.1.9
Since `provides` can already be specified on the command-line with #1041, `provides` searches could be used in the following way:
* Do…
AladW updated
2 months ago