-
### Checklist
- [X] I am using the latest version of Alarmo (latest version can be found [here](https://github.com/nielsfaber/alarmo/releases/latest))
- [X] I checked for similar existing requests (b…
-
### The problem
I use the manual alarm integration. It's been working for years. Now when I try to set the alarm I get the error message `Failed to call service alarm_control_panel/alarm_arm_away. Va…
-
Hey :)
I can choose in the drop down in the alarm panel card all modes, even they are not used/deactivated (for me e.g. armed_home)
HA default alarm card is showing only the for me relevant ones.
…
-
### The problem
Envisalink integration + alarm-panel card displays keypad unnecessarily.
**Expected behavior** (core-2024.5.5 and earlier):
* alarm-panel card does **not** display a keypad if `en…
-
### Checklist
- [X] I am using the latest version of Alarmo (latest version can be found [here](https://github.com/nielsfaber/alarmo/releases/latest))
- [X] I checked for similar existing requests (b…
-
After upgrading HA to 2024.6, I was receiving an error trying to alarm my panel without a code.
Seems to be related to:
https://github.com/home-assistant/core/issues/118668
The following post h…
-
## Alarm system
SP6000+ with an IP150
## Environment
Home assistant on VM - Latest
Core
2024.6.3
Supervisor
2024.06.0
Operating System
12.3
Frontend
20240610.1
### Git branch
Unsur…
-
### Alarmo Version
v1.10.1
### HA Version
2024.5.3
### Bug description
precondions:
- only one mode selected (away) - no pin code selected
If status is armed and one door (binary …
-
### The problem
My Abode alarm connects using the HomeKit controller. Both the 6.0 and 6.1 core update break the alarm panel. Giving the error code required where this alarm has no code required.
…
-
### The problem
When I set an automation that sends two commands consecutively to Satel Integra, the second command is ignored. I have two zones and the automation is for arming/disarming them both a…