-
When I setup the integration initially, I checked the box to setup alarm ip server. I noticed that in the nvr configuration that there is nothing listed under alarm host ip or alarm host port.
Shou…
-
Hi,
can you please add the "LocaleIds" Property to change the displayed textLocale from the alarm-events?
my problem is, that i cannot change the displayed text language from my plc-alarms to Germ…
-
Schaltet man bei aktiver Verbindung BSC zu MQTT den Accesspoint aus oder trennt man den MQTT Server vom Strom, so fällt das BSC kurz aus.
=> Keine Daten mehr an Victron => Anlage geht auf Störung
…
-
## Description
I have built open62541 with UA_ENABLE_SUBSCRIPTIONS_ALARMS_CONDITIONS and UA_ENABLE_SUBSCRIPTIONS_EVENTS. Then I followed the tutorial on OPC UA Alarms and Conditions (https://www.…
-
Hi,
can you please add the "LocaleIds" Property to change the displayed textLocale from the alarm-events?
my problem is, that i cannot change the displayed text language from my plc-alarms to Germ…
-
As a scientists i do not want a clash to happen if i start a move of several axes and one of them was not communicating. I would like teh reflectometry server to check that none of the axes in the mov…
-
iDS-ECD8012-H/T
制造商:Hikvision
固件:V5.5.80
MAC: EC:C8:9C:58:62:AB
![image](https://github.com/user-attachments/assets/50864a52-2538-47cb-a6ae-2d6d343653b9)
![image](https://github.com/user-attach…
-
Hello.
Firstly, I want to thank author for great integration.
I have NVR DS-7616NXI-K2 with firmware V4.75.005 build 230630. There is no tab "Alarm server". I have only "Other" tab.
![Screenshot …
-
**Describe Your Environment**
I got the following Compile error on
Suse Linux Ent 15.4
ZoneMinder 1.37.64 (current git release)
Source Compile
make 4.2.1
gcc 7.5.1
ffmpeg 4.4 and also tried …
-
### What happened?
eclipse.paho.mqttv5.client will can not pull message from emqx,
wait for 90 second,
the client disconnect
(使用Eclipse的paho客户端,每天会有一次突然卡住拉取不了数据(业务量很低),超时90s触发断开重连)
### What did…