-
The RX on the Metro 2 GMRS repeater has declined significantly. This repeater always has transmitted better than it received. I suspect antenna issues, as little on the repeater end could change and a…
-
Dear Jakob,
I ask you to make in the configuration file a parameter for an optional delay of the audio signal from 0 to 20 seconds.
This is very important for radio amateurs so that they can liste…
-
The CTCSS processing code in branch lordmorgul:ham2mon:wbfm_ctcss_processing was partially tested working, it needs refactored into this fork to work.
It currently does remove the tone from the aud…
-
Since "issues" here are also about "new ideas", then I have a question: Do you know, if the squelch calibration values are hidden somewhere in the firmware? Is it possible to recalibrate squelch to hi…
-
There is a WiFi Manager library for Arduino. It allows the Wifi Radio to negotiate its log on to a network. This may be something to contemplate in the future for allowing messaging through a local ne…
-
# Background
MemHamWAN has one point-of-presence in the Memphis medical district named "LEB", a point-of-presence in east Memphis named "HIL", and a point-of-presence in Olive Branch named "CRW". T…
-
Ok, installed SVXlink on a raspberry pi, configure it as a simplex system and it works wel. at least, as far as I am now. But, I am still running into a few issues that I would like to resolve. But si…
-
It would be great if direwold supports the M17 project.
-
Hi Kristoff,
Have you thought about implementing an RX feature? I'm considering doing this for DapNET, as an alternative to commercial pagers...
Regards,
Manoel - ON6RF
-
Greetings,
Would it be possible to add a bit regenerator/packet repeater function? Many years ago, TAPR introduced a hardware version which went into a standard TNC2, which when attached to approp…