-
Hi guys. Issue 11 of Amiga Addict magazine listed the attached Top 100 Amiga games of all time as a pull-out poster.
I hoped you may be able to add this to the AmigaVision AGS menu if possible plea…
-
As mentioned in #180 by @PerspexSphinx:
Load/save palettes in several formats. Possible formats to support:
- .Pal Amiga (DPaint & Brilliance)
- .Col Amiga (Personal Paint)
- .Pal Modern (Graf…
-
Hi there.
So I tested out the project from running VSCode in Linux and installed from Marketplace. I then set the ROMs from the interface. Following the Quick-start guide until I was ready for exam…
-
### I did this
using GCC = m68k-amigaos-gcc version 13.2.0
AmigaSSL v5 (Latest Oct 24)
Zlib 1.3.1 (Cross Compiled with soft-float by me)
In hopes of - Building curl 8.11.1-DEV (m68k-unknown-amigao…
-
```
[12ms] Platform: ZuluSCSI Pico
[12ms] FW Version: 24.10.16-release Oct 16 2024 17:34:59
[12ms] DIP switch settings: debug log 0, termination 1
[12ms] SCSI termination is enabled
[12ms] Flash …
-
i have trouble with the scsi.device since i use Pistorm32-lite.
On my internal IDE-Port I have connected a IDE CF Adapter with an additional 44 Port IDE Connector. On that connector I have a slim IDE…
-
On an Amiga you could program the "Copper" part of Agnus chip to change the palette during render-out.
This had two common uses - firstly "HAM" (Hold And Modify) style screen modes, which could all…
-
Hi.
Not knowing how to compile or even coding I wonder if you could release a build with source code as well so I could try your program on my Amiga stuff.
Thank you very much
Alex
-
I am running Windows 11, but after starting the .exe, nothing happens.
Are there any special requirements?
By the way: we have published a little article on our website Amiga-News.de:
https://…
-
Hi !
Could you please include BOM and CPL Production Files, so i can order assembled Boards at JLCPCB or PCBway ? That would be great !
Does this Board also work in an Amiga 1000 ? I would like …