-
I have this nice integration running on my NIBE heat pump, via the SMO40.
I have many sensors giving data, and they have been for almost a year now, however I cannot get any meaningful data from the …
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.1 on 2024-07-23; ProS3 with ESP32S3
```
### Code/REPL
```python
import alarm
import board
import time
from microcontroller import …
-
**Question:**
I have a energy plot (amperage, voltage, power). The concept of negative energy does not apply to my scenario. Is there a way to show the plot starting at 0?
**ScottPlot Version:**…
-
would it be possible to have an amperage output as well? watts are actually really nice and useful, but I happen to have a lot of already recorded metrics in amperes instead of watts, which makes comp…
-
Is it possible to expose the amperage rate value to which you limit your on schedule charging to?
![image](https://github.com/bretterer/home-assistant-rivian/assets/16869713/e739d1ec-20a3-4898-b933…
-
Hello, is there an amperage control limit? What amperage limit does this lib accept?
-
Claim of 15% error on peak amperage
more or less across the board - low RPM/8A peak or 3000rpm 17A peak oscilloscope shows ~15% less amps than commanded
more data to follow
-
If you can make a wider access of the voltage and amp control because if I don't set them it runs out of the limits 1.7A 4.4V so it would be nice to have the limit warning being actually Recommended l…
-
Hi. You made an great scheme, but i want to put about 20m strip to this controller. It will take about 25 ampers, but as i understand, maximum load is 4a.
What i need to change in this scheme to us…
-
Calling 'sensors' will return the list of supported hardware sensors, and is used by some applications to monitor the status of hardware devices.
Any item wanting to use the CPU temp however may ge…