-
I'd like to point out that I tried many times to attach a .zip, .gz, or .tar file to this post.
I did manage to get github to format this post properly.
```
Ecowitt WS68
Lux, Battery, Wind speed…
-
### Platform
NRF52, ESP32
### Description
Hi, Just wondering what the best approach might be to add Anemometer support for environmental data on Meshtastic. The use case of a remote weather station…
-
**Describe the problem you have/What new integration you would like**
I would love to integrate the Anemometer sensor Ventus WS132. As its not so pricy.
It has sensors for wind speed, wind direc…
-
Is it possible? Do we need one? More than one?
-
There is an issue with the `wdir_l` measurements since February 15th.
The figure below shows a shift in the `wdir_l` values from February 15th. The difference plot also shows a slightly increase in…
-
I've been around this sensor for a few years, and finally got around to working out what I think the bits are.
However, I'm not quite confident enough to write a proper decoder.
It's a battery+sol…
-
The plan is to create cheap ultrasonic anemometer with good stability in all weather conditions and reasonable accuracy around 1 m/s or less.
Unfortunately my knowledge in this area is lacking but…
-
I encountered the following issue when running ros2 launch test_env main_simbot_launch.py:
ros2 launch test_env main_simbot_launch.py
[INFO] [launch]: All log files can be found below /home/gouqin/…
8ijuu updated
2 months ago
-
I'm a bit concerned about the current 'home AWS' style anemometer. I can't say I feel like it will be up to the test of measuring gusting winds around 80 km/h on big fire weather days, or 100+ if @jos…
-
Hi there,
Looking to see if a new icon can be added. The purpose is for Personal Weather Stations (or PWS). The icon idea could be a wind vane and anemometer.
Photos:
- http://icons.wxug.com/i/mic…