-
Support:
1. Multiple spanning tree protocol events: https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-8214/Content/events/MSTP.htm
2. MVRP events: https://www.arubanetworks.com/techdocs/A…
-
Support the below event types:
1. IRDP events : https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-8214/Content/events/IRDP.htm
2. L3 Encap capacity events : https://www.arubanetworks.com/…
-
1. Hardware Health Monitor events - https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-8214/Content/events/HW-HEALTH-MONITOR.htm
2. Hardware Switch controller sync events - https://www.arub…
-
Support for:
1. CFM events: https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-8214/Content/events/ETH_OAM_CFM.htm
2. Container Manager events: https://www.arubanetworks.com/techdocs/AOS-C…
-
## Description
Support for:
1. AAA Events: https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-8214/Content/events/AAA.htm
2. ACLs Events: https://www.arubanetworks.com/techdocs/AOS-CX/10.0…
-
With all the product lines that Aruba (HPE, 3Com, HP) have absorbed over the years, and the renaming, it is very confusing for end users.
This, I think, is a summary of the official designations (I…
-
Capirca currently does not support two ACL Syntaxes for Aruba switches, so it would be great if we could add them.
they are documented here:
https://support.hpe.com/hpesc/public/docDisplay?docId=a…
-
Currently the CX collection doesn't support check mode in which it reports what changes would take place in the event the playbook would be executed.
-
Trying to set a new untagged vlan on a tagged port:
Hardware: CX6300, running 10.13.xxxx
Base config:
show runn int 1/1/10
interface 1/1/10
no shutdown
no routing
…
-
I get the following error
```
File "/home/m/work/aos/camorph/m.py", line 4, in
cams = camorph.read_cameras('nerf',r'/home/m/work/aos/nerfdata/take15_optimized_cams/transforms.json')
File …