-
I was looking to see how feasible it would be to use APA102 strips with this project, but [this comment](https://github.com/Lixie-Labs/Emotiscope/blob/d34b92a158938849510d84c47a59d86e583864fe/src/EMOT…
-
Previous work on an R.Pi.4 is throwing an error on the R.Pi.5.
I'm using apa102_pi and the demo script therein:
https://github.com/tinue/apa102-pi/blob/main/runcolorcycle.py
and seeing a 'GPIO …
-
@wuppious Can you make maybe also one that works with APA102 DotStar and works with LedFX. It would be much appreciated thanks in advance!
-
Is it possible to output multiple apa102 strips (SPI) using parallel output on teensy4?
I am aiming for 14 strips in parallel.
something likethis that maybe has a shared clockpin?:
FastLED.addL…
GvBon updated
2 months ago
-
Hi, has this been tested with apa102 leds
Trying to get these working on the esp32 with not much luck
Thanks
Phil.
-
Hello,
do you support apa102 leds ?
for exemple this: https://www.sparkfun.com/products/14016
thanks
ts-sz updated
5 years ago
-
Hello, I have MicroPython v1.9.1-219-g3580284e installed at my ESP32 NodeMCU development board, but unfortunately I can't find APA102 library included altought it should be in ESP8266 1.9.1 microPytho…
-
### The problem
I can use esphome with fastled_spi light platform.
But effect speed too low.
I want to use NeoPixelBus, but apa102 is not working with my code.
hardware:
WT32-ETH01 + 74AHCT12…
-
Could you please help me get the APA102 option working? I use the "apa102.ino" example sketch with an Uno. I attach one APA102 LED to pin 6 and 5 per the sketch notes:
`apa102 strip;` and use pins…
-
Oops, silly me.
simap updated
3 years ago