-
Currently, the org.eclipse.keyple.core.plugin.spi.reader.ReaderSpi interface allows APDU commands to be transmitted uniquely one-by-one to a local reader.
For a reader solution based on a communicati…
pterr updated
2 months ago
-
Hi @EYALIN, thank you for creating this fork! We will use it in our project.
Do you think it's possible to support sending raw commands (APDU) on iOS? On Android, this is already implemented with n…
-
Some e-SIM capable modems lack AT commands required for functioning AT APDU backend, or it's functionality is reduced.
For these, alternative APDU backends could help, depending on the [modems suppor…
bam80 updated
1 month ago
-
libfido2 code here force use 0x00, https://github.com/Yubico/libfido2/blob/main/src/nfc.c#L187
- ctap2 spec examples use 0x80, https://fidoalliance.org/specs/fido-v2.2-rd-20230321/fido-client-to-auth…
-
Hello @camcima,
I'm integrating the code from your project into my application and I'm trying to read the data on a card. I have success with the swipe function and I'm getting the card data. But I ru…
-
The modem is Fibocom L860GL-16.
Logic Channel seems successfully open but then `Send APDU:` part fails, I tried different commands:
```
$ DEBUG=1 ./wrapper.py chip info
recv={"type":"apdu","payl…
bam80 updated
2 months ago
-
The AT command APDU driver seems to misunderstand how 3GPP TS 27.007 works. It assumes that the unsoliciated `+CCHO` response will return the logical channel number, and will then by itself patch tha…
-
Dear Team,
We would like to use your Feitian iR301-UD-C card reader to retrieve data from health cards stored in the public directory. The following information is what we intend to read and displa…
-
I was reviewing the documentation for pcsc-relay and considering initiating vpcd through a launch daemon using the command `pcsc-relay --emulator vpcd.`
This setup would allow VPCD to manage the port…
-
hi @z3ntu,
what's the current status of the project?
I've two Foxconn modules (T77W968 and T99W175) that have embedded eSIM, but no AT commands to use with LPAC, so only way is to send APDU thru Q…