-
I am relatively new to Home Assistant and have been learning and exploring its features every day. However, I have encountered a challenge that I am struggling to overcome, and I am reaching out to se…
-
I have downgraded the software to version 3.3.4. Reseted the camera and pressed for 10 seconds to activate pairing mode, but for some reason it won't read any QR code (aQRootg3.py generated or origina…
-
I'm using go2rtc on synology nas and deploy with docker.
But it's always crashed and restart when I start the stream.
Here is the config.
```
hass:
config: "/hass-config"
streams:
aqa…
-
I have an Aqara G2H camera added to my HA via HomeKit Controller. When I try to receive rtsp stream from go2rtc, I add "?video&audio=aac" to rtsp link and get an error, stream goes to be in “unavailab…
-
Hi there
Thanks so much for the plugin. I'm just struggling to get it going, I'm getting these 2 errors:
```
Logger: homeassistant.components.camera
Source: custom_components/aqara_camera/came…
-
Hi anyone encountered this? I have managed to follow the 'NOT Flash' method of adding the E1 Hub into HA. However, afterwards, the sensors (I only have water sensors) no longer works to detect water l…
-
Hi @niceboygithub , recently I found a new way to read/write gateway hubs by utilizing `/tmp/miio_agent.socket`.
There is a `ha_agent` process that actually act as an IPC message broker for all oth…
-
Sorry if it is not the place for asking, but I would like to set up an unknown face detection sensor using yaml (not nodered), so every time the camera detects an unknown face the sensor in HA reflect…
-
Hey @AlexxIT! First of all, amazing work you've done with this repo.
I'm on a quest to integrate Aqara A100 locks to Home Assistant somehow.
I first started to work with Zigbee2Mqtt devs t…
-
### What happened?
I have 3 separate daily feeding times configured in the Aqara Pet Feeder ([ZNCWWSQ01LM](https://www.zigbee2mqtt.io/devices/ZNCWWSQ01LM.html#aqara-zncwwsq01lm)) through Z2M, and i…