-
Suggestion for setting up archers. As I understand in the original, archers shoot a maximum of 4 blocks, which is why they are practically useless. It would be cool if this could be changed or a confi…
-
Hello
I have a USB wifi Tplink Archer T2U Nano
With chipset Realtek RTL8811AU
Using a raspberry pi 2 with latest dietpi armv7 bookworm
Installed wifi hotspot mode but after I realized that …
-
### Describe the bug
U-Boot 1.1.3 (Dec 13 2021 - 15:33:52)
Board: Ralink APSoC DRAM: 128 MB
relocate_code Pointer at: 87f58000
Config XHCI 40M PLL
******************************
Softwar…
-
Main Rx = Archer SR8 Pro on 2.1.14
Radio X20 Pro on Ethos 1.5.7
On April 26 I was using an Archer SR8 Pro when a failsafe occurred on turn to final about 50m away 10m high. The problem started at …
-
Changing the Flat Modifier RE to:
`{
"key": "FlatModifier",
"predicate": [
"archers-aim",
"ranged",
"item:group:bow"
],
"selector": "attack",
"type": "circumstance",
…
-
### Checklist
- [X] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the results …
-
Does it work on this device?
https://openwrt.org/toh/tp-link/archer_c20_v5
-
Everything fine when get all the commands but the problem is if the exploit attempt 3 to 4 times the ps4 is crash and shut off...
-
**Describe the bug**
The Problem is: that you are always thrown out of the WiFi when it is started via the home assistant because, as can be seen in the log, an incorrect command is sent or triggered…
-
1、"X:\mir2-master\Server\MirObjects\PlayerObject.cs"(13559,13): HeroObject hero = CurrentHero.Class switch
public void SummonHero()
{
HeroObject hero = CurrentHero.…