-
The VARA HF modem is proprietary and specific to the Microsoft Windows operating system. While it is possible to get it working on Linux and the BSDs with WINE and winetricks, it is not trivial to do …
-
For HF use Ardop mode would be good to have.
For 1200bd packet should TNC-Pi9k6 work instead of TNC-Pi?
73 Jouko OH5RM
-
This setting trips up a lot of operators and there is no reason it can't be set to true by default. It should have no negative impact on users that rely of VOX instead of CAT PTT control.
-
I've gone on a bit of a mission to see if it is possible to use the QRP-Labs QDX with Winlink. As the QDX only supports single carrier modes, I'd like to be able to only enable FSK modes with ardopc.
…
-
Hello Peter,
I'm sporadically encountering the issue quite well described in the attached logs.
The logs comes from the second (in few minutes) connection with a nearby gateway, with signal 559…
-
I recently rebuilt CalcTemplates.c, which is intended to create ardopSampleArrays.c. This contains the digitized sample data for constructing transmitted signals. CalcTemplates.c was not functional …
-
I am writing this to get other's opinions on reworking the invocation syntax.
## The Problem
I find that a lot of people make a mistake when invoking ardopcf, and it usually comes down to the wa…
-
Hi,
How should I start to test it with "dump pipe" modems for HF radio like VARA or ardop? Do you think it is worth taking a look on it from my side? I'm currently using UUCP, but I'd like to add som…
-
Attempting to connect to Pat UI from a different machine fails but from the local host succeeds.
The IP address of my machine is 192.168.1.10 and navigating from another machine to 192.168.1.10:5000 …
-
Hi again,
I've encountered a weird issue with P2P message transfers using ARDOP: for an unexplainable reason, some messages fail to transfer. I don't reproduce this issue with a telnet connection. …