-
Hello, I want to test lorawan now, but I can't get any further because the yaml can't be compiled in esphome.
here is my yaml, and the error message.
`Updating /config/esphome/lorawan.yaml
------…
-
Updating /config/esphome/lorawan.yaml
------------------------------------------------------------
INFO ESPHome 2024.10.3
INFO Reading configuration /config/esphome/lorawan.yaml...
ERROR Unexpec…
-
Trying to use `RADIOLIB_DEBUG_PROTOCOL` to get a understanding of why my device works better with some LNS than others.
When I enable `RADIOLIB_DEBUG_PROTOCOL` in `BuildOptUser.h` the console just …
-
**Describe the bug**
`LoRaWANNode::setBufferSession()` fails with `The Session buffer (1601) does not match the Nonces buffer (49f7)` when trying to restore data from a buffer.
After a successfu…
-
The device can join LoRaWAN network and I can send a downlink packet.
The device "he…
-
I have this error at the moment that I compile my code, and I don´t know why this appear if I don't still use any LoRa project
Library Heltec ESP32 Dev-Boards has been declared precompiled:
Using …
-
So...I have a couple of older LoRa board (V2) and I am not able to get them to running. I have the Arduino IDE (2.2.1) set up, with the libraries installed for Heltec, and when I select the example sk…
-
The code compiles fine but when i upload it to my Heltec WiFi LoRa V3 board the Serial Monitor shows the following error before doing a reboot:
```
joining...
Guru Meditation Error: Core 1 pa…
-
The library worked fine on Arduino 1.0.6, but after upgrading to v2.0.0 the device reboots on the next loop cycle after calling `Arduino_LoRaWAN::SendBuffer()`. I have a `Lora` wrapper class which sim…
-
I'm trying to run default examples without changing nothing, but i've got some errors.
How i can resolve?
Thanks
```
C:\Users\o.dimanno\Documents\Arduino\libraries\ESP32_LoRaWAN-master\src\reg…