-
Found a way to get the library to work on the Arduino Nano 33 BLE.
By default the UART on the NRF52 does not support custom baud rates or UART config other than the default but these can be configu…
-
I stumbled upon this:
https://github.com/lathoub/Arduino-BLE-MIDI?tab=readme-ov-file
It seems the work to implement BLE Midi on Nano 33 BLE is done for other midi libraries... will that make it …
-
Hello.
Testing this on XIAO BLE and it fails compile stating it needs fds.h?
What is the compatibility requirement for this code?
-
Hello there, @sulami
Thank you for this great project!
I would like to add support to arduino-nano-33-ble. I can fork this project and create a new one for that board, but I think it would be muc…
-
Standard pin names as `D10` are unknown for the Nano RP2040.
- Arduino IDE 2.3.2
- Arduino Mbed OS Nano Boards 4.1.5
- FQBN: `FQBN: arduino:mbed_nano:nanorp2040connect`
```
loading library …
-
Hi, Does this firmware support [Arduino Nano 33 BLE](https://store.arduino.cc/arduino-nano-33-ble)?
This board uses nRF52840
-
Hi, I have little experience programming on Arduino.
I'm trying to implement firmware update via OTA on nRF52840 custom board (Arduino Nano 33 BLE).
The ArduinoBleOTA library seems very suitable to …
-
I'm writing some bluetooth application using the Nano 33 BLE. I was trying to use the `addDescriptor` method as described in [the ArduinoBLE documentation]((https://www.arduino.cc/reference/en/librari…
-
Hello!
First of all, thanks a lot for the library.
I currently have a MCP2518FD-Click and i wanted to use it along with my Arduino 33 nano BLE.
I already tried the example LoopBackDemoArduinoUn…
-
### Description
Hello,
The time library does not work on the new Arduino Nano BLE 33 board.
### Steps To Reproduce Problem
When I just upload an empty code with only:
#include I get an e…
ghost updated
3 years ago