-
Hello, I am a beginner with ROS 2 and micro-ROS. Currently, I have a Raspberry Pi 4 with Ubuntu Mate installed. I needed to install Arduino 1.8.19, which required me to install Teensyduino separatel…
-
- Arduino board: **teensy 4.1**
- Arduino IDE version (found in Arduino -> About Arduino menu): **not installed / not relevant**
**REPRO STEPS BELOW**
* apply patch from https://github.com/…
-
I have tried running it, by checking the box to use the CLI and
setting the address of where I expanded the executable into from the .tar.gz file
Note: I am trying it running on a Raspberry PI 5 …
KurtE updated
2 weeks ago
-
I tried your smalloc in an embedded environment (PJRC Teensy) which so far works perfectly. Ultimately I want to use it to access an externally attached memory chip which I'm sure will work as well.
…
-
Arduino: 1.8.9 (Windows 10), TD: 1.58, Board: "Teensy 4.0, Serial, 150 MHz, Faster, German, Normal"
Several libraries were found for "SD.h".
C:\Users\rosen\OneDrive\Documents\Arduino\audio-guestbo…
-
Attempting to use PlatformIO with the latest version of this library and a Teensy2 (ATMega32U4) via
```ini
[env:teensy2]
platform = teensy
board = teensy2
framework = arduino
build_unflags = -…
-
### Describe the problem
I install in this case support for Teensy boards.
I verify that it works and notice some of the options were not enabled in boards.txt.
So I go and edit the boards.txt to …
-
Add a page with latest compiled firmware and instructions on how update the commutator with it.
-
These are not show stoppers, but they are annoying. Compiler output below.
Can any of these be resolved?
Thank you,
Greg
/home/raven/Arduino/libraries/OpenAudio_ArduinoLibrary/output_spdif3_f…
-
## Issue template
- Hardware and Software description: Ubuntu 20.04
Ros2 Foxy (and on another setup with Humble as well)
`rduino IDE 1.8.15
Teensyduino 1.54
- Installation type: after insta…