-
Adding an Artnet Device as DMX receiver not working.
ArtNet Device stayed disconnected and reconnect didn't change that.
debug messages:
```
Player: listening on 37755
Debug: "https://raw.gi…
spezi updated
3 months ago
-
Hi!
I currently have several esps connected to each other by an esp in AP mode. I have an esp which transmits an artnet frame in broadcast. the problem is that the information is sent jerkily.
…
-
Hey there, sorry if this is the wrong place to ask for help :(
I'm trying to pull DMX information from my DJ decks via Art-Net to control some lights, but unfortunately I can't grab any packets con…
-
This is kind of 2 issues, but they might be related. I have 2 identical ESP-12N development boards each with it's own MAX485 driver. I am trying to set up one as a transmitter and the other as a rec…
-
Hello,
I have an Teensy 3.2 and 3.6 how many leds/universe can i drive per Teensy ?
-
Hi,
I am currently testing your library with ESP32-EVB, an ESP32 board with ethernet. I have no problem if I let the controller know the IP of the board (Unicast mode I believe). I get the following…
-
Hello,
Thanks again for the amazing work you did, creating these wonderful sets of libraries,
For a project, I need a very small controller with a RS485 dmx receiver.
I was planning to use the [M5…
-
The read() function refers to reading the data from the DMX buffer in the chip.
-
I have the beta5g running on an ESP-12E chip and it works just fine. (When using the precompiled bin files) Will it be ported over to the ESP-32 chip in the future and also have you figured out why th…
-
But works with the 2.0 Firmware. RPi use the latest firmware. wheezy distro:
```
Linux pixelinvader 3.12.20+ #685 PREEMPT Fri May 23 18:59:01 BST 2014 armv6l GNU/Linux
```
Details:
```
Mai 27, 2014…