-
I'm using the latest ESP32 firmware build from Wed Feb 7 17:51:08 2018 +0100.
Trying to get SIM card balance with the help using USSD request.
For this purpose, I'd like to get a full AT command o…
-
I am using NuttX 12.2.1 on an stm32 nucleo f103rb with a SIM7600G-H to try to use an AT command (via the LTE library).
This is how I am using the AT command:
int customhello_main(int argc, char *…
-
My ESP8285 firmware is up-to-date, and I can't seem to use SSL with the latest firmware as the AT firmware crashes. Please see below:
```python
>>> import network, machine, os
>>> wifi = network.…
-
After successfully flashing the provided firmware, When I try to connect with this error.
Sipeed Dock M1W with ESP8285
```python
>>> import network
>>> wifi = network.wifi
>>> wifi.reset()
>>> w…
-
When passing a compound literal to a function that takes a struct argument, CMock gets confused about the number of arguments that were passed.
```
modem_at_ExpectAndReturn((ATCmd){"AT+CIPSTART=\"udp…
-
Good morning,
I've been running the device in standalone mode with the HSPI ATCMD firmware. I've found a bug that if you send it some data it will go into passthrough mode even if you sent a size o…
-
**Is your request related to a missing feature?** No
**Describe the solution you'd like**
Adding extra functionality to searchstores script command.
for instance:
```
searchstores ,{,…
-
This ticket, starting from the #1 brainstorming, is to provide a virtual terminal emulation pty that can handle and parse AT Commands (see https://github.com/collab-project/atcmd) hooked to the Dialer…
-
I am using SIM5320 which has same AT Commands as the SIM800 only supports 3G.
I am able to communicate with the device using the UART directly, but unable to get any response using the gsm module.
…
-
Dear newracom sir,
I use the AT CMD to enter the AP mode, but in AP mode it cannot be used to send UDP packets, the AT CMD is as follows.
AT
SEND: AT
RECV: OK
AT+WCOUNTRY="US"
SEND: AT…