-
Hi there,
I'm currently trying to use your modified kernel driver to simultaneously receive data with two Atheros NICs on one device. The main problem is that I cannot access the individual receiv…
-
I have a setup for capturing CSI consisting out of a Laptop (14.04, AR9462) and multiple routers (Archer c7v5, QCA9563) running OpenWRT. I have associated them, the laptop being the AP (using hostapd,…
-
Hi Yaxiong,
I am also trying to use your CSI tool with the Intel Galileo Board like the user in issue #12. I was wondering what you meant in #12 by "replace the ath9k driver with our modified one a…
-
Hi everyone,
I'm quite curious about this tool.
I have a couple of Dell laptops (a Latitude E6320 and a Latitude 13), both with a Compex WLE600VX Wifi module (Atheros QCA 9882) and Ubuntu 14.04.06…
-
Two devices with openwrt
1. tplink 841Nv11 - Qualcomm Atheros QCA9533 (able to send and receive)
2. Archer c7 v1.1 - Qualcomm Atheros QCA9558 (able to send and receive)
lorcon package doesnt have o…
fpeci updated
5 months ago
-
Hello Dr.xie!
Rencently, I ported the csi tool to an Atheros 9344 running OpenWrt. Sadly, its very few although the csi data generated. Can you tell the test enviroment you built?
-
zhy123@zhy123-Lenovo-XiaoXin-700-15ISK:~/Atheros-CSI-Tool$ make -j16
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
DESCEND objtool
CHK scripts/m…
-
Hi xie,
I find the sendData code must send the data by associating the access point, if not, the data won't come to the driver. Can you help me to find some method to send data in Not-Associate …
-
Hello @xieyaxiongfly
I have compiled your modified kernel on my laptop with Atheros AR9285 NIC. But, it does not have any ath9k modules installed on it. Please help in this matter ASAP.
Thanks.
-
Hi there,
I am trying to get this working on a **TP-LINK TL-WA901ND v4** Access Point using OpenWRT.
I have sucessfully ported the modified driver from here:
https://github.com/xieyaxiongfly/At…