-
Hi,
Thanks you for this libray, i used with Nano, Mega and Due.
I will use a beetle DFR0282 ATmega32u4 looks like as a Leonardo.
Is this libray compatible with this?
regards
andy
-
В строке 94, файла GyverWDT.h, неверно указано определение для ATmega32u4:
``` c
...
defined(__AVR_ATmega32u4__) || \
...
```
Нужно заменить на:
```c
...
defined(__AVR_ATmega32U4__) || …
-
Do you plan to support https://github.com/mvirkkunen/usb-device on atmega32u4? It would validate the usb-device abstraction and would allow to use rust to implement USB keyboard on most QMK compatible…
-
Is it possible to use xboot on ATmega32u4?
-
Atmega32U4 is another popular (older) alternative to the `STM32F1`
-
ATMega32U4 has port E and only pin 6 is useable. This pin is also used in Arduino Pro Micro as Digital Pin 7. But the configurator only shows PORT B, C, D, and F.
The image below is Pin Mapping of …
-
Maybe there's something I'm not understanding but some searching leads me to believe that ATMEGA32U4 is a chipset and none of what I see online appears to resemble your step in the guide.
brenr updated
3 years ago
-
Hi, someone knows other boards that have this project ported to? STM32, ESP32, rp2040, etc.?
-
Is it possible to connect HUSKYLENS and EV3 with arduino pro micro?
I would like to experiment with breadboards.
Where should I connect the wires to and from?
arduino pro micro : https://x.gd/xpb…
-
Someone recently suggested that many drone application could benefit from encryption/authentication. Its a little beyond the scope of this project, but I thought it was a seed worth planting.
Would t…