-
Currently, the number of supported platforms is rather minimal. If the owners are alright with it, I'd like to designate this issue as a tracking issue for boards/chips which are not yet implemented i…
-
Cartridge - Mario Kart (Japan);
Original CIC chip - NUS 6102;
UltraCIC-III asembler code was compiled to hex by the Microchip Studio software;
hex file was flashed to attiny25;
set up:
fuse bit…
-
It would be nice if there would be a possibility to add more than just the DIP pintable.
Some chips have different packages and currently only one is possible.
Examples:
http://datasheets.maximi…
-
Hi
i have used your example code to drive servo but while uploading
Here's the error. Thanks !!!
libraries/Servo8Bit-master/example.cpp.o (symbol from plugin): In function `delayMicroseconds(unsi…
ghost updated
3 years ago
-
Hi Dear @sandeepmistry , I'm gonna running LoRa(RA-02 Module) with Attiny85. After burning Bootloader, Attiny works properly with Blink and other basic Programs. **But This library Didn't recognize At…
-
Hi @furrtek , the hex file does not work if flashed via a tl866 or an arduino, so i recompiled it and created another one that works. This new file has been flashed multiple times on an attiny25 via …
-
Hi!
I have a few questions regarding the PicoBootSerial bootloader, and possibly integrating it with Avrdude, which by the way has [migrated over to Github](https://github.com/avrdudes/avrdude) and…
-
The cores are not recognized with the Arduino IDE 1.8.x
Even though the board manager says they are installed. The error is the following:
```
Error compiling for board ATtiny25/45/85.
The curre…
-
Hi, I would like to use a dell adaptor (7,4 mmx 5mm) taken from my broken power bank.
I would like to use a microcontroller (like Arduino) to send messages over the third wire and allow the charger…
-
- Arduino board: None -- raw ATTiny25
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.3 (Windows Store 1.8.6.0)
-I'm using a Tiny25 to scan for an unknown number of I2C devi…