-
Hi,
I'm working with Pierre-Yves Rochat and prof. Jean-Daniel Nicoud.
I've checked your program. Congratulations, it's working!
Working perfectly with AVRDUDE (W7 x64).
I've observed 2 bad points:
- a…
-
Same code is working on ATtiny85 but not working on ATtiny45: https://github.com/moononournation/NeoPixelHexPendant/blob/main/NeoPixelHexPendant/NeoPixelHexPendant.ino
I know memory is an issue, but …
-
Hallo,
ich habe das Shield hier gefunden und nach einiger Überlegung die Platine machen lassen. Die Bauteile sind auch schon bestellt zum bestücken.Nun ist mir aber eine Frage aufgekommen und zwar wi…
-
I tried to use the lib in a small RCSwitch (https://github.com/rkopka42/MUX_servos3). It reads one input, sets some pins and makes a small delay (100ms). Everything worked fine with an Arduino Uno.
W…
-
I tried to run the simple example of [Adafruit's NeoPixelLabrary](https://github.com/adafruit/Adafruit_NeoPixel) on my ATTiny45 on every pin it doesn't work, no response at all (flashing via ArduinoIS…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
it looks like that simavr does not recognize/accept a vcd input file OR the layout/structure of the vcd input file is not well documented. I try to stimulate PB2 as input. GTKWAVE shows that the vcd f…
ghost updated
5 years ago
-
Currently the code doesn't allow 31250 with 8 Mhz CPU. What is it so @jarosz ?
I tested to remove the CPU speed test in
((baudRate == 31250) && (F_CPU == 16000000L)) ||
and
ca…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…