-
_axi.disconnect()_ throws an error when called. I'm using the latest p5.axidraw.js release.
`p5.axidraw.js:2 Uncaught (in promise) TypeError: this.ebb.disconnect is not a function
at t. (p5.ax…
-
Drawing with A4 paper, 25 mm margin, Older Axidraw model (V2?) with Firmware 2.6.5
The axidraw is trying to reach over its limits (pulls too much back or too far away) and grinds the gears.
What …
-
I made sure, that the AxiDraw is properly connected to my Laptop and has power.
My system:
```
Ubuntu 16.04.4 LTS (Xenial Xerus)
Node: 10.5.0
NPM: 6.1.0
```
```
» cat config.ini
httpPor…
-
See eg.:
https://www.codeotaku.com/journal/2010-10/mr-painting-robot/index
This issue is supposed to collect ideas for rendering this type of art on an axidraw.
-
Currently the only way to tell whether saxi is connected to an AxiDraw is by watching the console, or the tooltip on the 'saxi' logo. This state should be more obvious (especially for [saxi-app](https…
-
Hey, thanks for the great tool.
I'm using saxi on a headless raspberry pi to control an [iDraw A3 plotter](https://uunatek.com/product/idraw-handwriting-drawing-machine/). The machine uses the Axid…
-
axi.moveTo() works great however the axi.penUp() and penDown() shows no response.
My hypothesis is that the SE/A1 with Brushless Servo upgrade requires a different configuration. See equivalent con…
-
Hello,
I fixed my initial incorrect installation of this extension, but I am still having issues getting this extension to work at all without Inkscape reporting errors from Python.
I am using Wi…
-
When I use a path using a very long and continuous line get Axidraw to be very jerky and slow while printing.
It make a nasty and unusual sound. The saxi preview move normally but the actual printer…
TarGz updated
2 years ago
-
It seems that after a successful plot, the carriage returns to home and executes a pen down. Is there a way to turn this off so that it doesn't mark the paper? I'm not sure why it does this, since th…