-
HEy, could you add a bad usb mode? just like the portalhack one or one with a usb cord and a webside to upload skripts and execute them? (ducky script) that would be really cool and would bring the m5…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
zry98 updated
1 month ago
-
As the title describes, in my use, I found that if I don't re-plug the USB, only the first signature is successful, and when I perform the signature again, I will encounter the following bad PIN fail …
-
HI. I have the same device - Daichi dw22-b ver-03 and i have a problem with connect it to computer. When connect it i get an error:
```shell
sudo dmesg
[ 2940.865999] usb 1-2-port2: Cannot enable. …
-
I use libgphoto2 (2.5.31) from python-ghoto2 on RPI3/4/5 running Bullseye and Bookworm. I use more Sony fullframe mirrorless cameras **Sony A7I, II, III, IV**. My application uses **USB preview** or …
-
### Category
Serial
### Hardware
T-Deck, Station G2, Other
### Firmware Version
2.3.11+
### Description
When the esp32 enters light sleep mode the usb serial connection does not a…
-
Hi,
I hope someone can help me with this issue. My plutoplus used to work fine until I plugged it into a computer with seemingly insufficient USB power.
Now when I plug it to my Linux box on whi…
-
```
I experience bad read/write performance of my attached USB storage disk.
The read performance I get is 1 MB/s and the write performance 250 KB/s.
However, I would expect read/write performance to…
-
```
I experience bad read/write performance of my attached USB storage disk.
The read performance I get is 1 MB/s and the write performance 250 KB/s.
However, I would expect read/write performance to…
-
Hello All,
I have been seeing a steady increase in problem report messages from users of Realtek based WiFi 6 USB WiFi 6 wifi adapters. It is to the point that I think I need to add more warnings a…