-
Today I setup Balena Pi Hole and noticed that it has Tailscale support. It says for accessing the pihole admin UI from outside the network.
I posted this in https://forums.balena.io/t/balenapihole-…
-
Somewhere between balenaOS 2.38 and 2.43, the use of fbcp has started blanking the display output on small PiTFT screens (using the pitft35 and pitft28 dtoverlays).
On 2.43, starting fbcp clears th…
-
Hey, firstly thanks for having the 64 bit repo of this 🙇🏼♂️
I've just been trying to deploy this to Balena and the only way I could get the deploy to deploy on Balena was to use `cloudflared:lates…
-
Hello, yesterday i downloaded the PiHole BalenaOS image, i flashed it this morning using Etcher to a 32 Gb Samsung SD Card. When i go to boot it up i get a grey screen for about 1 minute and then i ju…
-
After a full restart of my RPi3 (shutdown and power off/on), pihole doesn't respond to DNS queries until I restart the pihole container again. Logs/testing output below:
**Logs from power-on:**
…
-
## Overview
When attempting to install motioneyeos **202006006** onto a **Raspberry Pi Zero W v1.0**, after first inserting the SD card into the RPi0, the Pi is stuck on the rainbow screen (remains…
-
```
jenkins-leviathan-v2-template-3843-client-1 | [2022-08-12T18:19:18.415Z][worker-os] ok 1 - Blocking NTP by stopping dnsmasq.service # time=9120.753ms
jenkins-leviathan-v2-template-3…
-
```bash
root@cli:/vagrant/tests# ./test.sh all
Branch - master
Image - 0.12.4
Version - 1.19.6
✓ ap local test1 (check ap...press any key to continue)
✓ ap local test2 password (check…
-
After watching the following [video](https://www.youtube.com/watch?v=rXc_zGRYhLo&t=795s), I tried replicating the same installation process on a mini PC. However it seems that many of the requirements…
-
I am using LibreSpot with the JACK Audio backend, and it worked perfectly, but since a few days I can't play any tracks. I didn't change any configurations on my side, so I assume there is a problem w…