-
Trying to crosscompile perl 5.40.0 from x86_64-linux-gnu to riscv64-linux-gnu with perl-cross 1.5.3 results in
```
gcc -o miniperl miniperlmain.host.o av.host.o scope.host.o doop.host.o doio.host…
-
In
- #4852
the only way to enable BFD is after a rack install. For some network configurations, it may be necessary to set up BFD during rack installation.
-
There have been inciedents where a BFD case have gotten a incorrect bfdaddr set in zino1 backend.
This makes zinolib fail with this error message:
```
----> 1 for x in sess.cases_iter():
2 …
-
-
Today, when a bgp or bfd neighbor goes down there are no connection between this alarm and what physical interface it is connected to.
But as zino collects at least all ip adresses used on each de…
-
1. /bfd/interfaces/interface[id]/config/local-address? oc-inet:ip-address
---> It specifies either of v4 or v6 address can be configured per interface.
---> Does that BFD session can be present o…
-
Hi All,
Looking at current openconfig BFD YANG, looks like its interface based, meaning configs and peers are under interface.
There are cases like multihop BFD where interface may not be needed it …
-
Happens on Manual or automatic reloads.
200ms
x 5
Bifrost Bridge.
3116 shaped devices
-
**Description:**
I am using the Ansible module fortinet.fortios.fortios_system_interface to create a VLAN interface. The physical interface (an aggregate interface) belongs to a different VDOM than…
-
Trying to work around #79, I tried building `cargo-bolero` with `honggfuzz` feature but that fails:
```
linux/bfd.c: In function 'arch_bfdDisasm':
linux/bfd.c:231:5: error: too few arguments …