-
The TuYa TYGWZ-01, which were at some point sold in Lidl and Aldi and widely modified for use with ZHA/Z2M with these initial instructions: https://zigbee.blakadder.com/Tuya_TYGWZ-01.html
Currently…
-
After [accepting the alpha version of the code](https://github.com/Koenkk/zigbee-herdsman/pull/317), now I propose to write comments here until we complete the development.
The adapter is designed …
-
Hi, thanks a lot for providing updated firmwares for these devices!
Just to let you know, the latest version of the firmware for TUYA TYGWZ01 in this repo does not seem to work properly.
When tryi…
-
Hello,
Can you please check if the pinout below is correct.
Also it seems that this module has different pad numbers as per table 2-1 from [Tuya V2.0.0](https://fcc.report/FCC-ID/2ANDL-TYZS4/447…
-
Pre advising of likely upcoming device support.
Elelabs Zigbee have 2 old radio modules with unknown firmware that is based on the EM357:
Elelabs Zigbee Raspberry Pi Shield EZBPIS and Elelabs Zigbee…
-
Hello,
my ZigBee stick Nortek HUSBZB-1 shows sometimes as offline even it is my Coordinator.
How can it be that the Coordinator is shown as offline even the communication with all my other devices…
-
The update ultimately worked (I think)
But when I ran the scan tool (./ncp.py scan)
It hung at USB0 (needed a cntl c)
And then it reported this:
{"ports": [{, "deviceType": "unknown", "pid": "8…
-
Hello,
First of all i would like to say thank you for your commitment and effort on this!
I recently bought Tuya Smart Gateway model GW-018 (wifi + ble + zigbee) (https://a.aliexpress.com/_EjwjehJ)…
-
EZSP 6.8.0.2 have adding one "NCP UART HW GP MULTIRAIL (Hardware Flow Control)" sample that shall implanting GP functionality in the NCP.
Its need 2 GP parameters in the firmware for making it poss…
-
Silicon Labs EmberZNet 6.10.3.0 GA should really be mature and stable enough now as only contain bug-fixes since 6.10.0.0 GA.
Silabs EmberZNet Zigbee 6.10.0.0 was released on the 16th June of 2021 …
Hedda updated
2 years ago