-
How do configure the platformio.ini file to use the OTA upload protocol?
-
**Describe the bug**
If device is put to PinDeepSleep with time for example 10, it doesn't wake up after time passes. Wake up after pin action such as switch toggle works as expected. This issue occu…
-
I have the same two [thermometers ](https://www.elektroda.com/rtvforum/topic3819498.html) based on BK7231T.
Both have the same problem. After OTA update (Web Application -> OTA -> Select file -> Star…
-
**Describe the bug**
## Command
Device fails to send multiple `SendGet` commands
```
alias scared_of_the_dark backlog sendGet http://10.0.40.51/cm?cmnd=Power0%20Toggle; sendGet http://10.0.4…
-
### Version/revision of the library used
2.8.6
### Describe the bug
When I compile in ESPHome 2023.12.9 in Home Assistant IRremoteESP826, I get an error message.
Compiling .pioenvs/samsung-ac-…
-
**Describe the bug**
The device appears to boot loop when MQTT is not configured. This is evident on a device with an LCD time display that goes to 00:00 or the ntp offset time every 1 to 2 minutes, …
-
### The problem
I have multiple bk72xx smart plugs and have checked the changed internal temperatu…
-
**Describe the bug**
Had several attempts to upgrade a BK7231T 1.17.517 device via OTA to any other version, tried a few. Not working, not via webapp OTA nor via config->OTA.
**Firmware:**
- Vers…
-
I bought tuya e14 bulbs on aliexpress some time ago. I think there more noname than branded one. Brand Girier https://aliexpress.com/item/4001339522411.html I flashed them with your firmware and want…
-
Getting this error in esphome despite it seeming to be successful on a wb3l chip.
````
Processing office-test1 (board: wb3l; framework: arduino; platform: libretiny @ 1.7.0)
---------------------…