-
Can you share the target files that you used to build 6.1.0 version?
Thanks
-
Hi! I really love this open source project as an alternative to the Supernova board.
I was thinking, maybe it could be a nice idea to design an MCU that is pin-compatible with the Pico, but feature…
-
Hi,
I already installed blackmagic debug on my bluepill STM32f101, compiled on target swlink to directly use the pins SCK/DIO of the board.
I would like like to do the same on a blackmagic debug o…
-
I am playing with a blackpill stm32f401 to and zmk...
https://github.com/alinelena/zmk-config/
I have noticed that &reset just block the board
&bootloader just resets the board.
happy to provi…
-
I'm having trouble flashing this board. Today, I received the **STM32F411** board and decided to check if I could flash it before soldering it onto the PCB. I can successfully flash it, but the board …
-
- I installed the latest version of **U8g2** and selected the _U8g2 -> full_buffer -> GraphicsTest_ example
- I then uncomment the line containing
`U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0,…
-
I tried to build inav last commit 7.1.2, using target.c and target.h in this repository, everything went successfully but when flashed to the black pill F411 board the blue led was not blinking and th…
-
Hi
I tested P2.5(128x64) RGB Panel with stm32F103RCT6 72Mhz and blackpill stm32F411CE 100Mhz
stm32F411CE with 1 panel(128x64) or 2 panels (128x128) without Noise and Flickering , Correct Color…
-
Its my understanding that the two chips are pretty close together in features and capabilities.
Would be fun to extend this to support both, if possible.
-
I am having problems trying to build for a Blackpill clone - WeAct v3 type - with 3 oval buttons, STM32F401ccu6 processor, LED on PC13. I am running Arduino 1.8.12 with STM 2.2 boards
I can build …