-
aaaaaaa
-
Tried "nRF Connect" on iOS and can't seem to find the BLE Mac address in the format AA:BB:CC:DD:EE:FF.
Used another app (BLE Device Info) and still cant find the BLE Mac address in the format above.
…
-
### The problem
According to @jesserockz The problem seems to be that the ble_client triggering the on_connect automation maintains node_state independently of ble_client.ble_write action, and as a r…
hachi updated
1 month ago
-
Request 7:
Ble support?
*Suggested by @TeDeVPrime on #2*
-
Heltec WiFi LoRa 32 V3 board, the latest V3.1 board, has no discoverable Bluetooth, with RNode firmware 1.72
On my phone, when trying to add a BT device and pair it, nothing shows up, I did activat…
-
Currently if BLE_MAC is defined, BLE presence will run every ~3m
We can do better:
- Autogen BLE_MAC from VIN - thus removing BLE_MAC config option
- Add config option to enable or not presence d…
-
Absolutely amazing so far, thank you so much.
Just one thing I noticed was the BLE RSSI is mainly reading zero. Sometimes it does read correctly, but overall it reads zero. I'll attach a screensh…
-
There are still not implemented Bluetooth Mesh Protocol v 1.1 features.
Subnetwork bridge is one of them. The feature allows retransmitting frames from one subnetwork to another based on bridging t…
-
### Related area
BLE refactoring using NimBLE
### Hardware specification
Any
### Is your feature request related to a problem?
This is part of an effort to improve ESP32 Arduino.
### Describe th…
-
The wiki states that the following is supported :
BLE based (Gicisky/Picksmart)
2.13" TFT
2.13" EPD
2.9" EPD
4.2" EPD
There are other sizes, like 7.5 and 10.2, available from…