-
In your project, you recommended using Vgate icar pro 4.0, but the device manual we purchased only includes instructions for connecting to a phone. We need to connect to a computer via Bluetooth for d…
-
Hello,
Thanks for sharing this project.
Is it possible to use other BLE adapter than LeLink?
What should I change in the code to adopt it to the different OBD BLE adapter?
-
Thanks for your efforts. I'm using an Espressif ESP32-S3-DevKitC-1 board with a Waveshare SN65HVD230. I have wired everything as mentioned, however, this is all I see in SavvyCAN.
![image](https:…
-
So we can plug OBD [1] devices into the car and let Camel deployed to Raspberry Pi collect the car diagnostic information using the bluetooth.
[1] https://www.youtube.com/watch?v=WOQLh1iGN60
-
at begin - thank you for great project.
Normally I use Arduino IDE, and here with platformio I can not find definintions of pin used to communicate with display...
I searched code for all "MISO" …
-
Loving the idea of this! I will try to install shortly.
Was wondering if its possible eventually to emulate one of the elm327 or some other bluetooth OBD dongle in the future to read car CAN data …
-
# Describe the bug
Recent AndrOBD version ask for way too much permissions with no need.
![permissions](https://github.com/user-attachments/assets/0a9b1b97-c49e-4a99-8ca8-d2b5aacea398)
It sor…
-
hello thanks for your work! i'm currently stucked. I have uploaded this sketch:
ESP32_Bluetooth_Serial
ESP32_test
but i receive the message "Couldn't connect to OBD scanner"
i have this hardwa…
-
Hey,
great work with the OBD parser!
I have written a bluetooth connector for your module.
https://github.com/dominicrico/obd-parser-bluetooth-connection
Cheers!
-
Hi,
a greate feature would be, if the Bluetooth from the ESP/WARP Charger could be used to connect to a ELM327 Bluetooth OBD Adapter in the car, to read back the SOC of the car.
Reading SOC once whe…