-
# Log Message
```
2024-07-14 16:03:39.536 WARNING (MainThread) [custom_components.tuya_local.config_flow] Device matches None with quality of 0%. DPS: {"updated_at": 1720944215.581195, "9": "low",…
-
target: android 12.0 API31
I follow the guide make a test project. The scan result only contain smart ring,not contain my phone and bluetooth module(HC-06)
BTW, I didn't put
'uses-feature android…
-
My Renogy Rover 60A works like a champ! I thought I would try to use the same code for the Renogy Shunt 300 with Bluetooth, but that didn't work so well :-( It doesn't like the request payload.
…
-
No bluetooth devices show up when trying to pair with the new Moyu weilong V10 smart cube.
I think there's no driver for it on cstimer. I can find and connect to the cube on Cubeast but it then tells…
-
The ANCS Bluetooth protocol permits smart watches and other equipments to receive a notification feed from iOS devices.
This is a requirement to be able to receive notifications from the phone on Fra…
-
### Feedback
At https://www.home-assistant.io/integrations/aranet, the supported devices are reported as Aranet2 and Aranet4. However, an Aranet Radiation device is discovered, can be configured an…
-
### Feedback
Hi!
This page states that the Gardena Bluetooth integration is compatible with Gardena's 1867-20 Soil Moisture Sensor, which doesn't seem to support bluetooth based on Gardena specs (…
-
Is it possible to add Bluetooth LE support in aprsdroid?
e.g. HM-10 module
Thanks
Stephan
-
Hi there,
Any plans do integrate PETKIT Pura Air using Bluetooth Proxy?
Thanks!
Greate custom component!
-
**Model:** H5086
**Device Type:** Smart plug
**Connection Methods:** WiFi & Bluetooth. Unsure about LAN mode